国产美女裸体丝袜喷水视频 ,中国精品18videosex性中国 ,国产无遮挡又黄又爽动态图,高清无码中文字幕影片

  China Website 中文  
 
 
   
     
 
  Sensors, Transmitters and Controllers
  Flow
      Electromagnetic Flowmeter
      Paddle Wheel
      Oval Gear
      Ultrasonic
      Switch / Flow
      Transmitter
      Flow Fittings / Armature
      Rotameter
      FLOWave (SAW)
      Thermal mass flow meter
      Differential pressure
      Coriolis Mass Flow Meter
  Level
  Liquid Analysis
  Pressure
  Temperature
  Controllers / Transmitters
  Armatures for Analysis Sensors
 
  Ultrasonic  
     
  Type 8081 - Flowmeter for the continuous measurement of water  
 
     
 
  Type Description  
  The ultrasonic flowmeter Type 8081 is designed for the flow measurement of water which may also be slightly contaminated. The device consists of a brass fitting with an integrated measuring tube and a transmitter. It is available in 5 variants: QN 0.6 DN 15, QN 1.5 DN 15, QN 2.5 DN 20, QN 3.5 DN 25, QN 6.0 DN 25 with flow rate ranges of 0.06 to 20 l/min (nominal flow rate 0.6 m3/h i.e. 10 l/min), 0.1 to 50 l/min (nominal flow rate 1.5 m3/h i.e. 25 l/min), from 0.16 to 82 l/min (nominal flow rate 2.5 m3/h i.e. 41 l/min), from 0.6 to 116 l/min (nominal flow rate 3.5 m3/h i.e. 58 l/min) and from 1 to 200 l/min (nominal flow rate 6.0 m3/h i.e. 100 l/min) respectively. Each variant has either a pulse output or a pulse output and a 4…20 mA current output. The electrical connection is made via a 5-pin M12 male connector. Combined with a controller and a control valve, the device can be used to set up a control loop.  
     
  Features  
  « Ultrasonic flowmeter using transit time method  
  « Dynamic range ≥ 1:250  
  « Low pressure drop  
  « No flow-settling section necessary in the inlet or outlet  
     
 
 
 
  Downloads  
  Data Sheet